Configuration Examples For Implementing Mpls Ldp; Configuring Ldp With Graceful Restart: Example; Configuring Ldp Discovery: Example - Cisco CRS Configuration Manual

Implementing MPLS Label Distribution Protocol
Command or Action
Step 6
Use the commit or end command.

Configuration Examples for Implementing MPLS LDP

These configuration examples are provided to implement LDP:

Configuring LDP with Graceful Restart: Example

The example shows how to enable LDP with graceful restart on the POS interface 0/2/0/0.
mpls ldp
graceful-restart
interface pos0/2/0/0
!

Configuring LDP Discovery: Example

The example shows how to configure LDP discovery parameters.
mpls ldp
router-id 192.168.70.1
discovery hello holdtime 15
discovery hello interval 5
!
show mpls ldp parameters
show mpls ldp discovery
Purpose
commit—Saves the configuration changes and remains within
the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Configuration Examples for Implementing MPLS LDP
79