Enabling Rsvp Traps - Cisco CRS Configuration Manual

Enabling RSVP Traps

Related Topics
Overview of RSVP for MPLS-TE and MPLS O-UNI , on page 112
Enabling RSVP Traps
With the exception of the RSVP MIB traps, no action is required to activate the MIBs. This MIB feature is
automatically enabled when RSVP is turned on; however, RSVP traps must be enabled.
Perform this task to enable all RSVP MIB traps, NewFlow traps, and LostFlow traps.
SUMMARY STEPS
1. configure
2. snmp-server traps rsvp lost-flow
3. snmp-server traps rsvp new-flow
4. snmp-server traps rsvp all
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2 snmp-server traps rsvp lost-flow
Example:
RP/0/RP0/CPU0:router(config)# snmp-server
traps rsvp lost-flow
Step 3 snmp-server traps rsvp new-flow
Example:
RP/0/RP0/CPU0:router(config)# snmp-server
traps rsvp new-flow
Step 4 snmp-server traps rsvp all
Example:
RP/0/RP0/CPU0:router(config)# snmp-server
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
132
Implementing RSVP for MPLS-TE and MPLS O-UNI
Purpose
Enters global configuration mode.
Sends RSVP notifications to enable RSVP LostFlow traps.
Sends RSVP notifications to enable RSVP NewFlow traps.
Sends RSVP notifications to enable all RSVP MIB traps.