Cisco CRS Configuration Manual page 393

Implementing GMPLS UNI
Removal of the GMPLS UNI submode results in the removal of all configuration within it, including any
Note
other parser submode, and the immediate destruction of all GMPLS UNI tunnels.
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. gmpls optical-uni
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
mpls traffic-eng
Example:
RP/0/RP0/CPU0:router(config)# mpls
traffic-eng
Step 3
gmpls optical-uni
Example:
RP/0/RP0/CPU0:router(config-mpls-te)#
gmpls optical-uni
RP/0/RP0/CPU0:router(config-te-gmpls)#
Step 4
Use the commit or end command.
Purpose
Enters global configuration mode.
Enters MPLS-TE configuration mode.
Enters GMPLS UNI configuration submode.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Configuring TE for GMPLS UNI
375