Commit-Saves The Configuration Changes And Remains Within The; Configuration Session; End-Prompts User To Take One Of These Actions - Cisco CRS Configuration Manual

Configuring LDP Discovery for Active Targeted Hellos
SUMMARY STEPS
1. configure
2. mpls ldp
3. [vrf vrf-name] router-id lsr-id
4. interface type interface-path-id
5. Use the commit or end command.
6. (Optional) show mpls ldp discovery
7. (Optional) show mpls ldp vrf vrf-name discovery
8. (Optional) show mpls ldp vrf all discovery summary
9. (Optional) show mpls ldp vrf all discovery brief
10. (Optional) show mpls ldp vrf all ipv4 discovery summary
11. (Optional) show mpls ldp discovery summary all
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
mpls ldp
Example:
RP/0/RP0/CPU0:router(config)# mpls ldp
Step 3 [vrf vrf-name] router-id lsr-id
Example:
RP/0/RP0/CPU0:router(config-ldp)# router-id
192.168.70.1
Step 4 interface type interface-path-id
Example:
RP/0/RP0/CPU0:router(config-ldp)# interface
tunnel-te 12001
Step 5 Use the commit or end command.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
30
Implementing MPLS Label Distribution Protocol
Purpose
Enters global configuration mode.
Enters MPLS LDP configuration mode.
(Optional) Specifies a non-default VRF.
Specifies the router ID of the local node.
In Cisco IOS XR software, the router ID is specified as an interface
name or IP address or LSR ID. By default, LDP uses the global
router ID (configured by global router ID process).
Enters interface configuration mode for the LDP protocol.
commit—Saves the configuration changes and remains within the

configuration session.

end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.