Cisco CRS Configuration Manual page 49

Implementing MPLS Label Distribution Protocol
Command or Action
Step 6
show mpls ldp discovery
Example:
RP/0/RP0/CPU0:router# show mpls ldp
discovery
Step 7 show mpls ldp vrf vrf-name discovery
Example:
RP/0/RP0/CPU0:router# show mpls ldp vrf
red discovery
Step 8
show mpls ldp vrf all discovery summary
Example:
RP/0/RP0/CPU0:router# show mpls ldp vrf
all discovery summary
Step 9
show mpls ldp vrf all discovery brief
Example:
RP/0/RP0/CPU0:router# show mpls ldp vrf
all discovery brief
Step 10 show mpls ldp vrf all ipv4 discovery summary
Example:
RP/0/RP0/CPU0:router# show mpls ldp vrf
all ipv4 discovery summary
Step 11 show mpls ldp discovery summary all
Example:
RP/0/RP0/CPU0:router# show mpls ldp
discovery summary all
Related Topics
LDP Control Plane, on page 7
Configuring LDP Discovery for Targeted Hellos: Example, on page 80
Configuring LDP Discovery for Active Targeted Hellos
Purpose
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.
(Optional)
Displays the status of the LDP discovery process. This command,
without an interface filter, generates a list of interfaces over which
the LDP discovery process is running. The output information
contains the state of the link (xmt/rcv hellos), local LDP identifier,
the discovered peer's LDP identifier, and holdtime values.
(Optional)
Displays the status of the LDP discovery process for the specified
VRF.
(Optional)
Displays the summarized status of the LDP discovery process for
all VRFs.
(Optional)
Displays the brief status of the LDP discovery process for all VRFs.
(Optional)
Displays the summarized status of the LDP discovery process for
all VRFs for the IPv4 address family.
(Optional)
Displays the aggregate summary across all the LDP discovery
processes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
31