Configuration Examples For Implementing Ntp - Cisco ASR 9000 Series User Configuration Manual

Configuration Examples for Implementing NTP

root dispersion is 950.04 msec, peer dispersion is 3.38 msec
Configuration Examples for Implementing NTP
Configuring Poll-Based Associations: Example
The following example shows an NTP configuration in which the router's system clock is configured to form
a peer association with the time server host at IP address 192.168.22.33, and to allow the system clock to be
synchronized by time server hosts at IP address 10.0.2.1 and 172.19.69.1:
ntp
server 10.0.2.1 minpoll 5 maxpoll 7
peer 192.168.22.33
server 172.19.69.1
Configuring Broadcast-Based Associations: Example
The following example shows an NTP client configuration in which interface 0/2/0/0 is configured to receive
NTP broadcast packets, and the estimated round-trip delay between an NTP client and an NTP broadcast
server is set to 2 microseconds:
ntp
interface tengige 0/2/0/0
broadcastdelay 2
The following example shows an NTP server configuration where interface 0/2/0/2 is configured to be a
broadcast server:
ntp
interface tengige 0/2/0/2
Configuring NTP Access Groups: Example
The following example shows a NTP access group configuration where the following access group restrictions
are applied:
• Peer restrictions are applied to IP addresses that pass the criteria of the access list named peer-acl.
• Serve restrictions are applied to IP addresses that pass the criteria of access list named serve-acl.
• Serve-only restrictions are applied to IP addresses that pass the criteria of the access list named
• Query-only restrictions are applied to IP addresses that pass the criteria of the access list named
ntp
peer 10.1.1.1
peer 10.1.1.1
peer 10.2.2.2
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
226
broadcast client
exit
broadcast
serve-only-acl.
query-only-acl.
Implementing NTP