Cisco CRS Configuration Manual page 419

Implementing MPLS OAM
Bandwidth: 0 kbps (CT0) Priority: 7 7 Affinity: 0x0/0xffff
Metric Type: TE (default)
Fast Reroute: Not Enabled, Protection Desired: None
Record Route: Not Enabled
Destination summary: (3 up, 0 down, 0 disabled) Affinity: 0x0/0xffff
Auto-bw: disabled
Destination: 11.0.0.1
Destination: 12.0.0.1
Destination: 13.0.0.1
History:
Current LSP:
lsp-id: 10002 p2mp-id: 10 tun-id: 10 src: 10.0.0.1 extid: 10.0.0.1
LSP up for: 12w4d
Reroute Pending: No
Inuse Bandwidth: 0 kbps (CT0)
Number of S2Ls: 3 connected, 0 signaling proceeding, 0 down
S2L Sub LSP: Destination 11.0.0.1 Signaling Status: connected
S2L Sub LSP: Destination 12.0.0.1 Signaling Status: connected
S2L Sub LSP: Destination 13.0.0.1 Signaling Status: connected
Reoptimized LSP (Install Timer Remaining 0 Seconds):
None
Cleaned LSP (Cleanup Timer Remaining 0 Seconds):
None
Displayed 1 (of 16) heads, 0 (of 0) midpoints, 0 (of 0) tails
Displayed 1 up, 0 down, 0 recovering, 0 recovered heads
RP/0/RP0/CPU0:router# ping mpls traffic-eng tunnel-mte 10 lsp id 10002
Mon Apr 12 12:14:04.532 EST
Sending 1, 100-byte MPLS Echos to tunnel-mte10,
timeout is 2.2 seconds, send interval is 0 msec, jitter value is 200 msec:
State: Up for 12w4d
Path options:
path-option 1 dynamic
State: Up for 12w4d
Path options:
path-option 1 dynamic
State: Up for 12w4d
Path options:
path-option 1 dynamic
Reopt. LSP:
Last Failure:
LSP not signalled, identical to the [CURRENT] LSP
Date/Time: Thu Jan 14 02:49:22 EST 2010 [12w4d ago]
S2L up for: 12w4d
Sub Group ID: 1 Sub Group Originator ID: 10.0.0.1
Path option path-option 1 dynamic
Path info (OSPF 1 area 0)
192.168.222.2
11.0.0.1
S2L up for: 12w4d
Sub Group ID: 2 Sub Group Originator ID: 10.0.0.1
Path option path-option 1 dynamic
Path info (OSPF 1 area 0)
192.168.222.2
192.168.140.3
192.168.140.2
12.0.0.1
S2L up for: 12w4d
Sub Group ID: 3 Sub Group Originator ID: 10.0.0.1
Path option path-option 1 dynamic
Path info (OSPF 1 area 0)
192.168.222.2
192.168.170.3
192.168.170.1
13.0.0.1
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Configure the Ping and Traceroute: Example
[active]
[active]
[active]
(path weight 1)
(path weight 2)
(path weight 2)
401