Cisco CRS Configuration Manual page 302
Ios xr mpls configuration guide
Hide thumbs
Also See for CRS:
- User manual (304 pages) ,
- Configuration manual (292 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Configuring a Path Computation Client and Element
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. pce address ipv4 address
4. pce peer ipv4 address
5. pce keepalive interval
6. pce deadtimer value
7. pce reoptimize value
8. pce request-timeout value
9. pce tolerance keepalive value
10. Use the commit or end command.
11. show mpls traffic-eng pce peer [address | all]
12. show mpls traffic-eng pce tunnels
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
mpls traffic-eng
Example:
RP/0/RP0/CPU0:router(config)# mpls
traffic-eng
Step 3
pce address ipv4 address
Example:
RP/0/RP0/CPU0:router(config-mpls-te)# pce
address ipv4 10.1.1.1
Step 4
pce peer ipv4 address
Example:
RP/0/RP0/CPU0:router(config-mpls-te)# pce
peer address ipv4 10.1.1.1
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
284
Implementing MPLS Traffic Engineering
Purpose
Enters global configuration mode.
Enters MPLS-TE configuration mode.
Configures a PCE IPv4 address.
Configures a static PCE peer address. PCE peers are also
discovered dynamically through OSPF or ISIS.
Advertisement
Table of Contents
