Forcing The Current Application Period To Expire Immediately - Cisco CRS Configuration Manual

Configuring the Automatic Bandwidth
Command or Action
Step 5
show mpls traffic-eng tunnels [auto-bw]
Example:
RP/0/RP0/CPU0:router# show mpls traffic
tunnels auto-bw
Related Topics
MPLS-TE Automatic Bandwidth Overview, on page 190
Configure Automatic Bandwidth: Example, on page 353

Forcing the Current Application Period to Expire Immediately

Perform this task to force the current application period to expire immediately on the specified tunnel. The
highest bandwidth is applied on the tunnel before waiting for the application period to end on its own.
SUMMARY STEPS
1. mpls traffic-eng auto-bw apply {all | tunnel-te tunnel-number}
2. Use the commit or end command.
3. show mpls traffic-eng tunnels [auto-bw]
DETAILED STEPS
Command or Action
Step 1 mpls traffic-eng auto-bw apply {all |
tunnel-te tunnel-number}
Example:
RP/0/RP0/CPU0:router# mpls traffic-eng
auto-bw apply tunnel-te 1
Step 2 Use the commit or end command.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
290
Purpose
Displays information about MPLS-TE tunnels for the automatic
bandwidth. The globally configured collection frequency is displayed.
Purpose
Configures the highest bandwidth available on a tunnel without waiting
for the current application period to end.
all
Configures the highest bandwidth available instantly on all the
tunnels.
tunnel-te
Configures the highest bandwidth instantly to the specified tunnel.
Range is from 0 to 65535.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
Implementing MPLS Traffic Engineering