Configuring The Window Size For Rsvp Neighbor Authentication - Cisco CRS Configuration Manual

Configuring RSVP Neighbor Authentication
Command or Action
Step 3 life-time seconds
Example:
RP/0/RP0/CPU0:router(config-rsvp-nbor-auth)#
life-time 2000
Step 4
Use the commit or end command.
Related Topics
Security Association, on page 120
RSVP Authentication Global Configuration Mode: Example, on page 150

Configuring the Window Size for RSVP Neighbor Authentication

Perform this task to configure the RSVP neighbor authentication window size to check the validity of the
sequence number received.
SUMMARY STEPS
1. configure
2. rsvp neighbor IP address authentication
3. window-size N
4. Use the commit or end command.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
144
Implementing RSVP for MPLS-TE and MPLS O-UNI
Purpose
Controls how long RSVP maintains security associations with other
trusted RSVP neighbors. The argument specifies the
seconds
Length of time (in seconds) that RSVP maintains idle security
associations with other trusted RSVP neighbors. Range is
from 30 to 86400. The default value is 1800.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.