Enabling Mldp - Cisco CRS Configuration Manual
Ios xr mpls configuration guide
Hide thumbs
Also See for CRS:
- User manual (304 pages) ,
- Configuration manual (292 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Implementing MPLS Label Distribution Protocol
Enabling MLDP
Perform this task to enable Multicast Label Distribution Protocol (MLDP) in MPLS LDP.
SUMMARY STEPS
1. configure
2. mpls ldp
3. mldp
4. end or commit
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
mpls ldp
Example:
RP/0/RP0/CPU0:router(config)# mpls ldp
Step 3
mldp
Example:
RP/0/RP0/CPU0:router(config-ldp)# mldp
RP/0/RP0/CPU0:router(config-ldp-mldp)#
Step 4
end or commit
Example:
RP/0/RP/0/RP0/CPU0:router
(config-ldp-mldp)# end
or
RP/0/RP/0/RP0/CPU0:router
(config-ldp-mldp)# commit
Purpose
Enters global configuration mode.
Enters the MPLS LDP configuration mode.
Enables MLDP.
• When you issue the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
• Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and returns the
router to EXEC mode.
• Entering no exits the configuration session and returns the router
to EXEC mode without committing the configuration changes.
• Entering cancel leaves the router in the current configuration session
without exiting or committing the configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Enabling MLDP
69
Advertisement
Table of Contents
