Table of Contents
Advertisement
3.7
Adjusting
System
Parameters and
Advanced
Controls
System Configuration
— GENERAL —
1.
The projector will automatically use the correct motion filter
AUTO:
according to the incoming signal.
2.
For static images with no motion, such as graphics from a CD.
STILL:
3.
For video images that did not originate from film, or for moving
MOTION:
computer-generated images.
4.
For video images that originated from film. This will optimize image
FILM:
quality and stability.
FILM MODE THRESHOLD —
detect if an incoming video signal originated from film or not. It should not require
adjustment.
DETAIL THRESHOLD
"Detail" control will begin to magnify high frequencies, which adds details back into
the image. Raise the threshold to ignore more of these high frequencies, and lower
the threshold to magnify more of these frequencies. A setting of "0", for example,
means no noise will be ignored and all will be magnified. An ideal detail threshold is
one in which high frequencies that are causing objectionable noise are not magnified
when using "Detail", but frequencies which can help sharpen an overly-soft image
are magnified.
Use the Configuration
menu to define general
operating parameters
and communications
with other projectors
and equipment, and to
access other advanced
processing and image
adjustments affecting
overall performance. In
addition, the
Configuration menu
provides access to
diagnostics, calibration
tools and the Service
submenu (password-protected).
Keep in mind that settings in the Configuration menu (and its submenus) are
typically "global" settings applied regardless of the type of source your are using.
This characteristic is identified with the
NOTE: The Configuration menu is recommended for experienced users/technicians
only.
The first six options in the Configuration menu are explained below:
'
Language
Choose from available languages to use in the projector's menus. The change will
take effect immediately.
This setting determines how sensitively the projector can
—Use "Detail Threshold" to define at what frequency level the
(globe) icon alongside the option.
Roadster/Mirage S+ User's Manual
OPERATION
3-37
Advertisement
Table of Contents
