MAINTENANCE
4-10
Roadster/Mirage S+ User's Manual
2. REMOVE FILTER DOOR
Loosen the ¼-turn screw at
the top of the filter
grille/door. Lift the door
away from the projector. See
Figure 4.6.
NOTE: In the Roadster
+
S
20K, also remove the
triangular metal filter brace.
3. REPLACE FILTER
Remove the old filter and insert the new one. Follow the
airflow arrows for correct orientation. See Figure 4.7. In
the Roadster S+20K, which has a rhomboid-shaped filter,
insert the sharply angled corner first – place fully back on
the left. Make sure to install the triangular metal filter brace
after the filter has been positioned. See Figure 4.8.
Figure 4.2. Installing the Angled Air Filter (Roadster S
4. RE-INSTALL THE FILTER GRILLE/DOOR
Secure with the single top screw.
Figure 4.6. Remove Filter Door
Figure 4.7. Airflow
+
20K Only).