Navigating The Menus - Christie Roadster S+ User Manual

OPERATION
3.4 Navigating the
Menus
On-line Help
3-12
Roadster/Mirage S+ User's Manual
NOTES: 1) The Lens
Shift
in keypad is the same as using the
"brick" rental staging keypad, use the 3 lens keys with the arrow keys.
Laser
NOTE: Not available on the "brick" rental staging keypad.
Press to activate the laser pointer, and direct the remote at the screen to
highlight an area with a light beam (dot). The closer you are to the screen the brighter
the laser beam appears. The laser pointer works best with reduced ambient lighting.
Backlighting
NOTE: "Brick" rental staging keypad only.
Press the "lightbulb" key to illuminate the keys on the remote without sending a
command to the projector.
Most of the controls for the projector are
accessed from within the projector's
menu system. There are several groups of
related functions, with each group
selectable from the Main menu as shown
at right. Press
Menu
this Main menu. Figure 3.5.
On the remote keypad, either enter the
number corresponding to the function
menu you wish to access, such as
the Image Settings menu. Or use the
desired option, then press
of further options will then appear.
With a function menu displayed, navigate in a similar manner—enter a menu option
number for any numbered option, or use the
option, then press
the arrow keys to access the remainder of the menu. Locked items or items that do
not pertain to the current action or condition appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
•
Press
Exit
•
Press
Menu
'
If at any time you are uncertain what to do next, press
information about the current menu or highlighted option. Press
addition, a line of "hint" text is included at the bottom of some menus. Figure 3.6.
key, when combined with
and
Lens V
at any time to display
for
2
. The corresponding function menu or pull-down list
(Enter). Extra long menus have a scroll bar on the right—use
to return to the previous screen
to leave the menu system and return to the presentation
keys on the built-
keys on the remote. 2) On the
Lens H
Figure 3.5. Entering the Menu System
keys on any keypad to highlight the
keys to highlight the desired
to display summary
Help
Help
again to exit. In