Table of Contents
Advertisement
OPERATION
Image Settings Menu
3-26
Roadster/Mirage S+ User's Manual
PLUG & DISPLAY (EDID):
(EDID) source outputs a signal according to the EDID
information provided by the projector. To override this
information and display in a different format (for
example, if your Plug & Play [EDID] device does not
support the projector's resolution and/or frequency),
select the desired Plug & Play (EDID) resolution from
the list.
Any daisy-chained projectors will also display
according to the chosen Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
Use options in the Image
'
Settings menu to alter your
main image without affecting
its size or position. Changes
made to the Image Settings
menu are applied
immediately and are saved
when you exit the menu
(press
or
). Options
Menu
Exit
not available for the projector
model or source are disabled
and appear dim (gray).
Contrast
Press
(
SHORT CUT:
"Contrast" increases or decreases the perceived difference between light and dark
areas of the image (0-100). For best results, keep close to 50. If the contrast is set too
high, the light parts of the image lose detail and clarity. If the contrast is set too low,
the light areas will not be as bright as they could be and the overall image will be
dim. For best results, start with a low value and increase so that whites remain bright
but are not distorted or tinted, and that light areas do not become white (i.e., are
"crushed").
Figure 3.15. Blanking of a PIP Image
By default, a Plug & Play
and adjust the slidebar.)
Contrast
Advertisement
Table of Contents
