Components - Christie Roadster S+ User Manual

INTRODUCTION
How The Projectors Work
1.2

Components

Model Name
+
Roadster S 12K 2.0 kW
+
Roadster S 16K 2.4 kW
+
Roadster S 20K 3.0 kW
+
Mirage S 14K 2.4 kW
1-2
Roadster/Mirage S+ User's Manual
Quick change bubble-style lamp module
Inputs
One analog RGBHV/YPbPr input with 5 BNCs
One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr signals
One analog composite-video input
One analog S-video input
Built-in multi-standard video decoder (NTSC, NTSC 4.43, PAL, PAL-M, PAL-
N, PAL-60 AND SECAM)
One Dual SD/HD-SDI input (standard in Roadster Series only)
Compatible with all currently used HDTV formats
Special Display Functions
Auto setup with seamless cut-and-fade source switching
Electronic brightness uniformity
Screen-to-screen matching and blending for smooth multiple-projector displays
Communications and Diagnostics
2 standard keypads: built-in and remote (for IR or wired control)
Front and rear IR sensors
Ethernet, RS232, RS422, and GPIO control ports
Easy-view LED for error codes and LCD for status and error messages
Voltmeter for monitoring AC
These projectors accept data/graphics and video input signals for projection on to
front or rear flat screens. High brightness light is generated by an internal Bubble
lamp, and then modulated by three DMD (digital micromirror device) panels that
provide digitized red, green or blue color information. Light from the "on" pixels of
each panel is reflected, converged and then projected to the screen through the front
lens, where all pixels are superimposed as a sharp full-color image.
Make sure you have received the following standard components:
Projector
Infrared (IR) remote keypad and conversion cable
Power cord
Roadster/Mirage S
Using 3D in Mirage Manual
3D Stereo Sync Cable
Differences Between Models
Lamp Dual SD/HD-
Type SDI Module
Optional
(NOTE: integral on Roadster S
+
User's Manual
(NOTE: for Mirage S
(NOTE: for Mirage S
3D Adjustable Iris
Not Available
Not Available
Not Available Not Available
+
20K)
+
Series only)
+
Series only
Stacking 4 Top
Mounts Eyebolts
Optional Optional
Integral Rigging
Hardware