Christie Roadster S+ User Manual page 10

INSTALLATION & SETUP
2-4
Roadster/Mirage S+ User's Manual
• The handles can't support more than 1 projector.
• Do not use handles for extended time periods.
• Do not use the handles as safety points, or as points
from which to suspend or hoist the projector.
Hoisting
Four integral rigging points on the top of the projector (Figure 2.5) and eight on the
bottom (Figure 2.6) enable either upright or inverted hoisting. For either orientation,
hoist an individual projector, or up to 3 projectors in a stack.
RULES FOR ALL HOISTING:
◊ Use at least 4 rigging points for hoisting up
to 3 projectors.
◊ Connect safety cables, and rigging
equipment to the designated locations on
the projector.
◊ Use hoisting and rigging equipment suitable
to your application such as clamps, cables,
eyebolts, or straps, and which accommodate
the load rating. All integral, metric
hardware on the projector accepts an M12
thread only.
◊ Never hoist a projector by its feet, handles,
or any other component (Figure 2.7).
WARNINGS
Figure 2.5. Top Rigging Points
Figure 2.6. Bottom Rigging
Points