Christie Roadster S+ User Manual page 49

DEFINING OTHER USES:
special user functions for keys 1 – 5 and 7 – 9 and others. For example,
programmed to trigger RTEs (Real Time Events) or to display custom menus. Refer
to the separate Christie Serial Communications publication.
Projector
Proj
Press
the local projector is listening. The number in the "Enter Number" window indicates
which projector is currently listening to commands, and will match the projector
number that has been defined in the Menu Preferences menu.
The "Projector" checkbox (read-only) shows whether or not the projector physically
connected to a keypad is listening to commands from that keypad. A checkmark
means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
To control a specific projector with the keypad, enter the 3-digit number assigned to
the projector you want to use. If you switch to a projector other than the one you are
currently using, the checkmark will disappear.
To broadcast to multiple linked projectors, press
entering a projector number. Keypad commands will then affect all projectors in the
chain.
NOTE: The "Broadcast Keys" option in the Communications menu must be selected
for only one (any) projector in a serial network. The keypad in use must be OFF
(disabled) for the remaining projectors. See also 2.14 Remote Keypad Protocols and
Conversion, and 3.7, Adjusting System Parameters and Advanced Controls.
Enter
Press
adjustment and return to the previous menu or image.
Exit
Exit
Press
NOTE:
editing of a slidebar value) or within pull-down lists. It acts as a "cancel" in these
cases.
Arrow Keys
Use the
within a pull-down list without having to first scroll through options. These keys also
jump to the next page in long menus. See also Editing Text later in Section 3.
Use the
combination with power, shutter and OSD keys to force the corresponding state. See
details provided on the back of the remote keypad.
Lens Focus, Zoom and Lens H, Lens V
, , ,
Focus Zoom Lens H Lens V
Use
the lens for optical sharpness, size, and position. Note the
Through ASCII messaging on a PC, you can also create
to access a specific projector within a group of projectors or to confirm if
Proj
to select a highlighted item, to toggle a checkbox, or to accept a parameter
to return to the previous level, such as the previous menu.
Exit
does not save changes within text editing boxes (including number
Exit
keys to change a slidebar value or to select a different option
keys to navigate within a menu, pull-down list or text box. Use in
, , , and
Focus Zoom Lens H Lens V
and then
Proj
Lens with their corresponding arrow keys to adjust
Shift
Roadster/Mirage S+ User's Manual
OPERATION
can be
Func
again without
Proj
requires a zoom lens.
Zoom
3-11