Christie Roadster S+ User Manual page 13

STEP 1 ' Position the projectors
Place the projectors to be
stacked on a secure table or
cart.
• Place one projector on its
side to access its
adjustable feet and
stacking legs (Figure
2.10).
• Orient the other projector
in either upright or
inverted position as
required (remember,
each projector in a stack
must be in the same
orientation).
STEP 2
Fully retract the (4)
'
adjustable feet
Retract each foot as far as possible by turning it clockwise.
•
If upright – retract the feet on top projector.
•
If inverted – retract the feet on bottom projector.
WARNING
Do not stack more than 3 projectors.
WARNING
Christie stacking hardware required. The top
projector could slide off and cause injury or death.
WARNING
Never carry a stack.
INSTALLATION & SETUP
Figure 2.10. Adjust the Feet
Roadster/Mirage S+ User's Manual
2-7