Table of Contents
Advertisement
OPERATION
3-14
Roadster/Mirage S+ User's Manual
For "blind" access, hide the entire menu system (see OSD key, above)
and/or direct slidebars activated by their own key (such as Contrast,
Brightness, etc.). Control by using the proper keypress or numerical
sequence of key presses.
When using PIP images, use
Once selected, change the settings as desired (see below). Changes take effect
immediately and are saved upon exit from all menus, or after 15 minutes.
Slidebars in menus –
The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slidebar
icon (adjustment window). This number often expresses a percentage, or it may have
units associated with it (such as pixels, degrees Kelvin, etc.), depending on the
specific option. Press
number and the length of the bar change accordingly. Hold for continuous
adjustment. Or press
the keypad, then press
"Direct" slidebars -
For quick access, you access Gamma, Brightness, and Contrast
slidebars without traveling the menu system. For example, simply press
immediately display the same contrast slidebar accessed with the
the Image Settings menu.
Use the arrow keys to adjust a direct slidebar, or press
number from the keypad, then
you are done, press
Exit
NOTES: 1) You can still adjust a direct slidebar as usual if the display is turned off
(see
or Menu Preferences menu) — the slidebar just won't be visible. 2) A
OSD
direct slidebar disappears if it is not used within 5 seconds.
Conditions are present if its adjacent checkbox contains a checkmark.
Checkboxes -
To toggle the checkbox, simply highlight and press
check and
to uncheck. If a checkbox is numbered, simply enter its number to
immediately toggle the checkbox.
To see a pull-down list of options available for a given parameter
Pull-down lists –
labeled with a , you can:
•
Highlight it and press
•
Or enter the menu option number.
Use
or
keys to navigate up and down within the list (the current choice is
noted with a small
). Press
'
3.8).
key to adjust the image.
to gradually adjust the setting up or down—both the
to activate a slidebar text box for specific number entry via
to save (or press
Exit
or
or
to return to your presentation.
(Enter)
to choose an option from the list, if desired (Figure
to cancel).
Cont
Contrast
and enter a specific
to save (or
to cancel). When
Exit
, or highlight and use
to
option in
to
Advertisement
Table of Contents
