Table of Contents
Advertisement
OPERATION
3-10
Roadster/Mirage S+ User's Manual
Invisible menus are fully functional, enabling "hidden" access to numbered features
and image adjustments by entering the corresponding sequence of keypresses on the
keypad.
NOTES: 1) With OSD "on", you can still hide error messages and slidebars by
disabling these options in the Menu Preferences menu. 2) The state of the on-screen
display appears in the LCD window at the rear of the projector.
PIP
Press
to enable and disable Picture-in-Picture. PIP enables you to display two
different images simultaneously – typically a smaller "secondary" image within a
large "primary" background. When a menu control or slidebar is present, press
toggle the current function to affect the other image.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35 kHz.
Swap
Swap
Press
to swap the current picture-in-picture relationship so that the primary
Swap
image becomes secondary, and the secondary image becomes primary.
NOTES: 1) This key is available on the "brick" rental/staging remote only.
Alternatively, a swap can be accessed in the menu system. 2) Requires PIP.
Shutter
Shutter
Press and hold
Shutter
open with a single keystroke. Or press and release
(shutter on; closed) or
(useful if you are unsure of the present state). Alternatively, press
from the present on/off state. A closed shutter blanks the display (turns it to black).
Close the shutter to mute all display while maintaining access to projector functions.
Opening the shutter restores the image.
NOTES: 1) The status of the shutter is shown in the LCD display window at the rear
of the projector. 2) The shutter is open upon power-up.
Function Key
Func
IF WITHIN A MENU:
with the appropriate topic elsewhere in Section 3. For example, press
Channel Setup menu to enable deletion or copying of a channel.
IF WITHIN A PRESENTATION:
digit number to enable a specific color or colors in the
display (see right). For example,
display only red and green data,
all color data. Eliminating one or more colors can help
with certain diagnostics and setups, such as when
accurately overlaying one image on top of another when
stacking projectors.
briefly to toggle the internal mechanical shutter blade closed or
(shutter off; open) to guarantee the correct toggle
Using the
for special tasks within the menu system is noted
Func
Press
followed by a 2-
Func
6
Func
6
7
Func
followed immediately by
Shutter
Shutter
4
will
will display
to
to toggle
Shutter
in the
Func
Advertisement
Table of Contents
