Adjusting System Parameters And Advanced Controls - Christie DS+5K User Manual

3.6 Adjusting
System
Parameters and
Advanced
Controls
System Configuration
— GENERAL —
4. For video images that originated from film. This will optimize image
FILM:
quality and stability.
FILM MODE THRESHOLD —
detect if an incoming video signal originated from film or not. It should not require
adjustment.
DETAIL THRESHOLD
"Detail" control will begin to magnify high frequencies, which adds details back into
the image. Raise the threshold to ignore more of these high frequencies, and lower the
threshold to magnify more of these frequencies. A setting of "0", for example, means
no noise will be ignored and all will be magnified. An ideal detail threshold is one in
which high frequencies that are causing objectionable noise are not magnified when
using "Detail", but frequencies which can help sharpen an overly-soft image are
magnified.
Use the Configuration menu
to define general operating
parameters and
communications with other
projectors and equipment, and
to access other advanced
processing and image
adjustments affecting overall
performance. In addition, the
Configuration menu provides
access to diagnostics,
calibration tools and the
Service submenu (password-
protected).
Keep in mind that settings in the Configuration menu (and its submenus) are typically
"global" settings applied regardless of the type of source your are using. This
characteristic is identified with the
NOTE: The Configuration menu is recommended for experienced users/technicians
only.
'
The first six options in the Configuration menu are explained below:
Language
Choose from available languages to use in the projector's menus. The change will
take effect immediately.
Image Orientation
Set the orientation of the image according to the orientation of your projector. If the
setting is incorrect, projected images will be reversed and/or upside down.
Reserved
No function.
This setting determines how sensitively the projector can
— Use "Detail Threshold" to define at what frequency level the
(globe) icon alongside the option.
Section 3: Operation
User's Manual 3-35
.