Christie Roadster S+ User Manual page 162

OPTIONAL INPUT MODULES
RGB400BA Input Module
38-804610-xx
RGB400 Active Loop-Thru
Input Module
38-804607-xx
F-2
Roadster/Mirage S+ User's Manual
RGB500 Features
◊
Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync), up to 500 MHz bandwidth
◊
Accepts YPbPr, composite (on green) and Y/C (on red/blue)
◊
BNC connectors for RGB signal inputs
Connect three-, four-, or five-wire RGB video signals of up to 400 MHz bandwidth—
'
these are signals typically produced by high-resolution computer or workstations. The
buffering capability of the module enables the incoming signal to be sent to a remote
destination. Inputs are 75
RGB400BA Features
◊
Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
◊
Accepts YPbPr, composite (on green) and Y/C (on red/blue)
◊
BNC connectors for RGB signal inputs
◊
Buffered signals to a remote destination
' The RGB400 ALT Input Module receives analog RGB input signals from computers
or other RGB source devices. Video inputs are 75
provide buffered loop-through to another display device.
RGB400 ALT Features
◊
Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
◊
Accepts YPbPr, composite (on green) and Y/C (on red/blue)
◊
BNC connectors for RGB signal inputs
◊
Buffered loop-through video outputs
Σ terminated.
Σ
terminated. Video outputs