Table of Contents
Advertisement
Hoisting Procedure
STEP 1 '
STEP 2 '
Remove the lens before hoisting a projector.
Figure 2.7. NEVER Use Handles for Hoisting or as Safety Points
'
This procedure applies to one or more projectors. To hoist a stack, first stack 2 or 3
projectors according to the stacking procedure included in this manual. Never stack
or hoist more than 3 projectors together.
Remove lens (recommended)
To prevent possible lens damage during hoisting, remove the lens. See 4.4,
Replacing the Lamp and Filter.
Retract feet
Retract the adjustable feet if the projector is inverted to prevent the hoisting hardware
from becoming snagged.
WARNING
Use metric hardware only.
Never force incompatible threads.
RECOMMENDED
WARNING
Never hoist a projector by its feet,
handles, or any other component.
Roadster/Mirage S+ User's Manual
INSTALLATION & SETUP
2-5
Advertisement
Table of Contents
