Christie Roadster S+ User Manual page 90

OPERATION
Working with PIP
3-52
Roadster/Mirage S+ User's Manual
Other PIP or Seamless Switching tips to keep in mind include:
•
When using 2 digital signals or 1 analog and 1digital, each must be ≤ 165
megapixels.
•
When using two analog signals, each must be ≤ 90 megapixels.
•
Avoid using an interlaced source in the PIP window
•
Seamless switching may affect image quality in some cases
NOTE: To control the primary image, access all picture controls through the Main
'
menu. To control the secondary (PIP) image, access picture controls through the
Picture-in-Picture and Switching menu.
Use the first of six
options in the PIP
and Switching
menu to enable and
define how you
want to use PIP.
Swap Main and PIP Image
Toggle the current picture-in-picture relationship so that the primary (main) image
becomes secondary (PIP), and the secondary image becomes primary. Swapping is
available only when PIP is enabled.
NOTE: There may be a slight delay when swapping the Primary and Secondary
images.
PIP Enable
(Short cut: Press
the Remote) if menu not
present.
Toggle to display from two
sources at once (Picture-in-
Picture) or the primary
source only. This checkbox
turns the secondary source
on and off.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35kHz.
on