Christie Roadster S+ User Manual page 91

Working with Seamless
Switching
PIP Size and Position –
SUBMENU
Most controls in the PIP Size and
Position menu adjust the PIP
(secondary) image in the same
fashion as their counterparts in the
main Size and Position menu adjust
the main image—see 3.6, Adjusting
the Image for details. Exceptions
are:
POSITION PRESETS
of the PIP (secondary) image in the display.
ASPECT RATIO PRESETS
"Default" aspect ratio matches that of the projector, whereas "Anamorphic" will be a
widescreen window. Choose according to your incoming source material.
PIP Image Settings —
Adjust the PIP (secondary image) without affecting the size or position. The primary
image remains unchanged. See 3.6, Adjusting the Image for details
PIP Border Width
Set the desired line thickness for your PIP window border.
PIP Border Color
Select the desired color for the PIP window border.
NOTES: 1) Numbers 7 and 8 on the Picture-in-Picture and Switching submenu
control switching parameters. 2) Disable PIP in order to work with Seamless
Switching. 3) Disable PIP and Best Switching for Interlaced sources > 35kHz.
Seamless Switching is the ability to instantly and/or smoothly switch sources, and is
'
controlled with options 7 and 8 in the PIP and Switching menu. To use Seamless
Switching, PIP must be disabled.
Tips for best source switching:
•
Make sure a channel has been configured for each source.
•
Progressive digital and analog sources are recommended
•
Set Image Optimization to
•
For best results, use the same frame rate and gamma setting for each.
NOTE: Avoid using two Interlaced sources.
Image Optimization
Use this setting to choose what is more important, image quality or switching
between sources. Selecting Best Image Quality will ensure your image is always
proper however when switching sources, the screen will go blank increasing your
switching time. Smooth Switching allows for a cleaner transition between sources.
The image will fade from one image to another according to the Fade Time control.
Seamless Switching overrides the Frame Lock Enable settings and forces the output
–Set the location
– Choose the desired aspect ratio for your PIP window. A
SUBMENU
Seamless Switching
(see below).
Roadster/Mirage S+ User's Manual
OPERATION
3-53