Adjusting The Image - Christie Roadster S+ User Manual

3.6 Adjusting the
Image
•
1-8, corresponding to where on the projector's input panel the
INPUT:
source is connected.
•
If checked (default, except for automatically defined channels
IN MENU:
with unchanged parameters), this defined channel will then appear in the
list available when
accessed via the channel setup menu
Source function.
NOTE: On-screen display of the channel list is an option that must be set
in the Menu Preferences menu.
•
AUTO SOURCE:
locate this channel when an incoming input signal matches. If not
checked, the projector can locate the selected channel only when it is
directly selected via
not result in a channel change.
•
If checked, all of the image settings for this channel are disabled.
LOCKED:
If unchecked (default), all available image settings can be adjusted as
desired. You cannot use Auto Setup with a locked channel.
•
PREVIOUS CHANNEL:
settings for the previous channel in the Channel Setup list.
•
NEXT CHANNEL:
for the next channel in the Channel Setup list.
The most commonly used options for image adjustments are accessed through two
menus: Size and Position (
appear in the Main menu. From either of these two menus, you can change settings
affecting the image from the current channel by working with the appropriate
slidebars, checkboxes and pull-down lists.
the presentation, if from the Main menu) and accept any changes you may have
entered. Settings are saved with the current channel.
From your presentation, you can access any of the individual options in these menus
by pressing followed by the appropriate two-digit number representing their
Menu
location in the menu system. For example, press
"Gamma" option in the Image Settings menu.
Note that for certain options, you may prefer to use a "direct key" from presentation
level to go directly to a particular option without traveling through the menu system
(available for certain display parameters only). For example, press
"contrast" slidebar immediately. Press
NOTES: 1) To hide these "direct" slidebars, disable the" Display Slidebars"
checkbox in the Menu Preferences menu. 2) To hide the entire menu system from
view, turn off the on-screen display by pressing
key is pressed. If unchecked, the channel must be
Chan
Menu
If checked, (default), the projector can automatically
on the keypad—and a change in input signal will
Chan
Select this option to see or change Channel Edit
Select this option to see or change Channel Edit settings
) and Image Settings (
Menu
will return to the previous menu (or to
Exit
Menu
to return to your presentation.
Exit
OSD
Roadster/Mirage S+ User's Manual
OPERATION
on the keypad or via the Auto
), both of which
Menu
to quickly access the
2 3
to access the
Cont
.
3-21