Chapter 8
[1]
F-8-14
2) Slide the reader unit so that the hole in the reader
unit and the hole in the top plate match.
F-8-15
3) Remove the 3 screws [1], and detach the fixing
assembly [2].
MEMO:
To remove the screw [1] used to secure the fixing
assembly in place, try removing the screws from
above the reader unit using a long screwdriver (i.e.,
make use of the opening above the screws to facilitate
the work).
8-8
When mounting the fixing assembly, be sure to
engage the gear of the fixing assembly and the gear on
the main motor side.
[1]
F-8-16
8.4.2 Pressure Roller
8.4.2.1
Removing the Left
Cover
1) Remove the screw [1], and detach the left cover [2].
F-8-17
8.4.2.2 Removing the Delivery
Cover
1) Remove the 3 screws [1], and detach the delivery
cover [2].
[2]
[1]
0006-3611
[1]
[2]
0006-3612