Analog Processor Pcb - Canon iR1200 Series Service Manual

Chapter 9
9.3
Parts
Procedure
9.3.1 Control Panel
9.3.1.1 Removing the Control
Panel
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
[2]
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel
disconnecting the connector [2].
[2]
9-10
Replacement
0006-2444
[1]
F-9-5
slightly as shown
[1]
F-9-6
MEMO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.

9.3.2 Analog Processor PCB

9.3.2.1
Copyboard Glass
1) Open the ADF (copyboard cover).
2) Remove the 2 screws [1], and detach the copyboard
glass retainer [2].
3) Remove the copyboard glass [3].
when
[2]
[1]
F-9-7
Removing the
[1] [3]
[2]
F-9-8
0006-2895