[2]
6) Return the reader unit to its initial position.
7) Open the ADF.
8) Using a flat-blade screwdriver, remove the cover
[1].
9) Detach the ADF [2] from the host machine.
[2]
[1]
Take care so that no part will become trapped by
harness of the ADF.
[1]
F-4-6
F-4-7
4.2.1.4 Removing the Printer
Controller PCB
1) Disconnect the connector [1].
2) Remove the 5 screws [2], and detach the printer
controller PCB [3].
[1]
4.2.1.5 Removing the Image
Processor PCB
1) Remove the retainer for the flexible cable used to
connect the analog processor PCB and the image
processor PCB.
2) Remove the core, and disconnect all connectors
from the image processor PCB [1].
3) Remove the 6 screws [2], and detach the image
processor PCB [1].
[2]
[2]
Chapter 4
0006-3236
[2]
[3]
[2]
F-4-8
0006-3237
[2]
[2]
[1]
[2]
F-4-9
4-3