Canon iR1200 Series Service Manual page 250

2) Remove the 2 screws [2], and detach the cover [3].
3) Remove the toner supply cover [1].
[1]
F-9-118
To mount, fit a screw or the like with the gear [1] lifted
in place the direction of the arrow as shown to stop;
then, attach the toner supply cover, and remove the
screw.
[1]
F-9-119
[2]
[3] [2]
9.3.14.3 Removing the Control
Panel
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
[2]
F-9-120
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel
disconnecting the connector [2].
[2]
F-9-121
MEMO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
Chapter 9
0006-3163
[1]
slightly as shown
[1]
when
9-37