Canon iR1200 Series Service Manual page 484

Chapter 15
Automatically Generated Reports
The following reports are generated automatically:
Type of report
Error TX report
(w/ error code list, dump list)
RX report (w/ error code list,
dump list)
Error TX Report (for service)
A service error code list and an error dump list may be attached to the error TX report. To do so, use service SSSW-
SW01 in service mode.
If 'attach' is selected for 'transmission image' under 'transmission result report' of [REPORT SETTING] in user mode,
a part of the 1st page of the transmission image will be attached when memory transmission is used.
15-76
02/01/2001 14:00 FAX
TYPE
LBP SPEED
TOTAL MEMORY
MAIN
MAIN2
ECONT
CAPT
READ ADJ PRM
18 :
21 :
23 :
24 :
25 :
34 :
35 :
----- EURO
----- 13SHEETS
----- 6656K
----- EURO-22-03
----- WLD-03-01
----- 0038
----- 0005
----- 3551
----- 0025
----- 0010
----- 0045
----- 0258
----- 0050
----- 0130
F-15-32
T-15-60
Operation
Enable automatic generation on the report
settings menu in user mode menu (i.e., use
bits 0 and 1 of SW01 of service data #1
SSSW).
Enable automatic generation on the report
settings menu in user mode menu (i.e., use
bits 0 and 1 of SW01 of service data #1
SSSW).
001