Removing The Analog Processor Pcb - Canon iR1200 Series Service Manual

9.3.2.2 Removing the Analog
Processor PCB
1) Move the contact sensor to the center.
2) Free the hook [1], and detach the cover [2].
3) Disconnect the 2 connectors [3].
4) Remove the 2 screws [4], and detach the grounding
plate [5].
[3]
[4]
5) Slide the reader unit.
6) Remove the screw [1] from under the reader unit.
7) Remove the 2 screws [2] from under the reader unit,
and detach the cover [3].
[2]
[3]
F-9-10
8) Remove the grounding plate [1], and detach the
analog processor PCB unit [2].
0006-2899
[2]
[1]
[5]
F-9-9
[1]
[1]
F-9-11
9) Disconnect the connector [1], and remove the 2
screws [2].
[2]
F-9-12
10) Remove the cover [1], and detach the analog
processor PCB [2].
[2]
F-9-13
Chapter 9
[2]
[1]
[1]
9-11