Error Code Table; Troubleshooting Malfunctions (Service Error) - Canon iR1200 Series Service Manual

14.1 Error Code Table

14.1.1 Troubleshooting Malfunctions (service error)

E000
Action
E001
Main cause
Action
The error history indicates any of the following error codes 4 times:
E001, E002, E003.
1) Clear the error.
Execute '#4 PRINTER RESET" under '#7 PRINTER' in service
mode to clear the error.; then, turn back on the power.
000 The main thermistor detects 230 deg C/446 deg F or
higher for 1 sec or more.
001 The sub thermistor detects 300 deg C/572 deg F or
higher for 0.2 sec or more.
The fixing film unit is faulty (thermistor short circuit). The
power supply PCB is faulty. The DC controller PCB is faulty.
1. Malfunction
Turn off the power; wait for 10 min, and turn it on. Is the
problem cor-rected?
YES: End.
2. Fixing film unit
Check the connector (4-pin) of the thermistor for electrical
continuity: 1-2 and 3-4. Is it 0 ohm?
T-14-1
T-14-2
Chapter 14
0006-3271
14-1