Pickup Solenoid - Canon iR1200 Series Service Manual

[3]
[3]
[4]
[3]
F-7-14
7.6.3.2 Removing the Printer
Controller PCB
1) Disconnect the connector [1].
2) Remove the 5 screws [2], and detach the printer
controller PCB [3].
[1]
F-7-15
7.6.3.3 Removing the Image
Processor PCB
1) Remove the retainer for the flexible cable used to
connect the analog processor PCB and the image
processor PCB.
2) Remove the core, and disconnect all connectors
from the image processor PCB [1].
3) Remove the 6 screws [2], and detach the image
processor PCB [1].
[1]
[2]
0006-3297
[2]
[3]
[2]
0006-3300
[2]
[2]
F-7-16
For installation, fasten the core to the upper position
with the part [1] and fix the cable with the part [2].
[1]
[2]
F-7-17
7.6.3.4 Removing the Cassette

Pickup Solenoid

1) Remove the copyboard cover. (If the machine has
the ADF, the ADF need not be removed.)
2) Remove the cassette.
3) Place the machine so that its pickup side is at the
bottom.
Chapter 7
[2] [2]
[1]
[2]
0006-3302
7-13