Registration Sensor - Canon iR1200 Series Service Manual

Chapter 10

10.4.15 Registration Sensor

10.4.15.1 Removing the Rear
Cover
1) Remove the screw [1], and detach the left cover [2].
2) Remove the 13 screws [3], and detach the rear
cover [4].
[3]
[3]
[4]
[3]
F-10-161
10.4.15.2 Removing the Right
Cover
1) Slide the reader unit, and open the cartridge cover.
2) Open the manual feed tray.
3) Remove the 2 screws [1], and detach the right cover
[2].
F-10-162
10.4.15.3 Removing the ADF
1) Remove the screw [1], and detach the ADF harness
cover [2].
10-42
0006-3980
[1]
[2]
0006-3981
[1]
[2]
[1]
0006-3982
F-10-163
2) Remove the harness retainer [1].
3) Remove the screws [2] and disconnect the
grounding wire from the core.
4) Disconnect the connector [3].
[1]
[2]
F-10-164
5) Using a flat-blade screwdriver or the like, remove
the 2 covers [1]; then, using long nose pliers or the
like, remove the 2 pins [2].
[1] [2]
[3]