Connection To Telephone Line; Connecting The Modular Cable (If Equipped With Fax Functions); Setting The Dial Type; Setting The Date/Time (User Mode) - Canon iR1200 Series Service Manual

2.3 Connection to Telephone Line

2.3.1 Connecting the Modular Cable (if equipped with fax functions)

1) Connect one end of the modular cable to the terminal [L], and the other end to the socket of the telephone.
If both telephone and fax are to be used, connect the modular cable from the telephone (or answering machine) to
the [telephone] terminal.

2.3.2 Setting the Date/Time (user mode)

1) Press the Additional Functions key.
2) Press the Left/Right Arrow key, to select '5.TIMER SETTING'
3) Press the OK key.
4) Check to make sure that '1.DATE/TIME SETTING' is indicated and press the OK key.
5) Enter the current date and time. Press the Left/Right Arrow key to move the cursor to the character to enter and
enter a number using the keypad.
6) Press the OK key so that the date/time will be stored.

2.3.3 Setting the Dial Type

1) Press the Additional Functions key.
2) Press the Left/Right Arrow key to select '3.FAX SETTING'.
3) Press the OK key.
4) Check to see that '1. USER SETTING' is indicated and press the OK key.
5) Check to see that '1.TEL LINE SETTING' is indicated and press the OK key.
6) Press the Left/Right key to select '2.TEL LINE TYPE'.
7) Press the OK key.
8) Press the Left/Right key to select 'TOUCH TONE' or 'ROTARY PULSE'.
9) Press the OK key so that the selected line type is stored.

2.3.4 Executing Communications Testing

1) Press the Fax key in the control panel so that the machine will be in fax mode.
F-2-22
Chapter 2
0006-2740
0006-2748
0006-2776
0006-2820
2-7