Canon iR1200 Series Service Manual page 124

Chapter 4
For installation, fasten the core to the upper position
with the part [1] and fix the cable with the part [2].
[1]
[2]
F-4-10
4.2.1.6 Removing the Control
Panel
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
[2]
F-4-11
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel
disconnecting the connector [2].
4-4
0006-3269
[1]
slightly as shown
MEMO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
4.2.1.7 Removing the Reader
Unit
1) Disconnect the 2 connectors [1], and remove the
harness retainer [2].
when
[2] [1]
F-4-12
[2]
[1]
F-4-13
0006-3267