Relocating The Machine; 1When Relocating The Machine; When Relocating The Machine - Canon iR1200 Series Service Manual

Chapter 2

2.5 Relocating the Machine

2.5.1 When Relocating the Machine

If the machine must be moved by truck or other means of transportation, be sure to go through the following:
1. If the machine is equipped with fax function and the move will take 2 hours or more, the fax image data, if any,
will be lost. Advise the user on this and, if necessary, print out the image data.
2. Be sure no communication is under way with an external device.
3. Check that the contact sensor is in home position and disconnect the power cord.
4. Disconnect the interface cable and modular cable.
5. Remove the delivery tray.
6. Slide the reader unit to the left, and open the cartridge cover.
7. Take out the shipping screw that have been stored away inside the machine.
8. Take out the cartridge from inside of the machine and put it in a protective bag or the like to avoid direct rays of
the sun.
9. Close the cartridge cover and put back the reader unit.
10. Fit the shipping screw you removed in step 7 and secure the contact sensor in place.
11. Open the ADF (copyboard cover) and place A4 (LTR) sheet on the copyboard glass then, close the ADF
(copyboard cover).
12. Tape the machine's covers in place so that it will not open in transit.
13. Pack the machine and start the relocation.
2-10
F-2-23
F-2-24
0006-2950