Canon iR1200 Series Service Manual page 181

processor PCB [1].
[2]
[2]
F-7-66
For installation, fasten the core to the upper position
with the part [1] and fix the cable with the part [2].
[1]
[2]
F-7-67
7.6.8.9 Removing the NCU
PCB (if equipped with fax
functions)
1) Disconnect all connectors form the NCU PCB.
2) Remove the 4 screws [2], and detach the NCU PCB
[1].
[2] [2]
[1]
[2]
0006-3445
F-7-68
7.6.8.10 Removing
Modular Jack PCB
1) Disconnect the connector [1].
2) Remove the screw [2], and detach the modular jack
PCB [3].
[3]
[1]
F-7-69
7.6.8.11 Removing the Main
Motor Unit
1) Pick the hook [1] with long nose pliers or the like,
and detach the registration roller gear [2].
Take care not to break the claw when removing the
gear.
Chapter 7
[2]
[1]
[2]
the
0006-3448
[2]
0006-3452
7-25