Canon iR1200 Series Service Manual page 180

Chapter 7
[4]
[1]
[2]
F-7-61
3) Disconnect the connector [1] connecting the leader
slide detecting switch and the toner supply cover
detecting switch.
[1]
F-7-62
4) Remove the 11 screws [1], and detach the plate [2]
and the upper cover [3].
[1]
[1]
[3]
F-7-63
7-24
[3]
[1]
[2]
[1]
For installation, fasten the core to the upper position
with the part [1] and fix the cable with the part [2].
[1]
[2]
F-7-64
7.6.8.7 Removing the Rear
Cover
1) Remove the screw [1], and detach the left cover [2].
2) Remove the 13 screws [3], and detach the rear
cover [4].
[3]
[3]
[4]
[3]
F-7-65
7.6.8.8 Removing the Image
Processor PCB
1) Remove the retainer for the flexible cable used to
connect the analog processor PCB and the image
processor PCB.
2) Remove the core, and disconnect all connectors
from the image processor PCB [1].
3) Remove the 6 screws [2], and detach the image
0006-3437
[1]
[2]
0006-3444