Canon iR1200 Series Service Manual page 173

in place the direction of the arrow as shown to stop;
then, attach the toner supply cover, and remove the
screw.
[1]
F-7-31
7.6.7.3 Removing the Control
Panel
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
[2]
F-7-32
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
0006-3806
[1]
To prevent damage to the flexible cable, be sure to lift
the control panel
disconnecting the connector [2].
[2]
F-7-33
MEMO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
F-7-34
7.6.7.4 Removing the Front
Cover
1) Remove the cassette.
2) Remove the screw [1].
3) Free the 5 hooks [2], and detach the front cover [3].
Chapter 7
slightly as shown
[1]
[2]
[1]
0006-3808
when
7-17