Canon iR1200 Series Service Manual page 464

Chapter 15
5. AGING Test (5: AGING TEST)
Not used.
6. FACULTY Test (6: FACULTY TEST)
Use it to check the operation of microswitches, sensors, speakers, and ADF.
7. BOOK Test (8: BOOK TEST)
Use it to turn on the contact sensor or to initialize the book reading position parameter.
List of Test Mode Items
To use test mode, press the Additional Functions key and # key; then, select 'SERVICE MODE' and select 'TEST
MODE' using the Left or Right Arrow key, and press the OK key.
To end test mode, press the Stop key and then the Additional Functions key.
15-56
TEST MODE [1] - [6], [8]
E120 : ###-##-##
1: D-RAM
1: D-RAM
[1] - - - [3]
******
1: D-RAM
******
1-3: IRAM TEST
2: CCD TEST
[1] - - - [8]
3: PRINT 3: PRINT
[0] - - - [9] , [*] , [#] 3-0: AMI PATERN
3: PRINT
3-1: WHITE
3: PRINT
3-2: BLACK
3: PRINT
3-3: STRIPES
3: PRINT
3-4: CHECKERS
3: PRINT
3-5: CHECKERS-2
3: PRINT
3-6: ENDURANCE
3: PRINT
3-7: BLACK/WHITE
3: PRINT
3-8: BIAS
3: PRINT
3-9: CHECKERS-3
3: PRINT
3-*: PRINTING AREA
3: PRINT
3-#: CRG TEST
F-15-10
14848K
14848K
(not used)
(disabled)
(disabled)
(disabled)
(disabled)
(disabled)
(disabled)
(disabled)
(disabled)
(disabled)
(disabled)