Setting The Printer Parameters - Canon iR1200 Series Service Manual

Chapter 15
7. CCD Settings
No.
21
23
24
25
26 to 33
34
*1: Make adjustments only When white lines occur. (See 3.1.12 of Chapter 7.)
*2: 1 of the 4 shading levels is selected by inputting a number from 0 to 3.
(In the case of being imputed a number over 4, the shading level is equal to that selected 0.)
The factory settings of these adjustments differ from machine to machine. For instructions on adjustment, see 1.2.4
of Chapter 7 or 1.3.4 of Chapter 7.

15.2.9 Setting the Printer Parameters

#1 SSSW Setting
#7 PRINTER-#1 SSSW-SW06 (reduction setting)
Bit
0
1
2
3
4
5
6
7
15-32
Item
left/right edge read start position adjustment
(book mode)
leading edge read start position adjustment
(book mode)
leading edge read start position (ADF mode)
trailing edge read end position adjustment (ADF
mode)
Do not change.
original feed speed adjustment (ADF mode)
Function
reduction at time of image
divi-sion
not used
not used
not used
not used
not used
not used
not used
Unit of adjustment
1 unit = approx. 0.03 mm
1 unit = 0.1 mm
1 unit = 0.1 mm
1 unit = 0.1 mm
-
1 unit = approx. 0.5 mm
T-15-29
1 0
prohibit do not
prohibit
- -
- -
- -
- -
- -
- -
- -
0006-3082
Factory
setting
0