Chapter 4
4.2
Parts
Procedure
4.2.1 Reader Unit
4.2.1.1 Removing the Rear
Cover
1) Remove the screw [1], and detach the left cover [2].
2) Remove the 13 screws [3], and detach the rear
cover [4].
[3]
[3]
[4]
[3]
4.2.1.2 Removing the Right
Cover
1) Slide the reader unit, and open the cartridge cover.
2) Open the manual feed tray.
3) Remove the 2 screws [1], and detach the right cover
[2].
4-2
Replacement
0006-3235
[1]
[2]
F-4-2
0006-3853
[1]
[2]
[1]
F-4-3
4.2.1.3 Removing the ADF
1) Remove the screw [1], and detach the ADF harness
cover [2].
2) Remove the harness retainer [1].
3) Remove the screws [2] and disconnect the
grounding wire from the core.
4) Disconnect the connector [3].
[1]
[2]
5) Using a flat-blade screwdriver or the like, remove
the 2 covers [1]; then, using long nose pliers or the
like, remove the 2 pins [2].
0006-3855
[1]
[2]
F-4-4
[3]
F-4-5