Opening A Command Line Window - Extron electronics VNR 100 User Manual

Opening a command line window

1. Use PuTTY to open a command window session from WinSCP. From the
menu, select
Open in PuTTY
1 1
Figure 27. Open a Command Window Session
A command line window opens with a password prompt:
Using username "matrix_rec".
matrix_rec@10.100.247.87's password:
Figure 28. PuTTY Password Prompt
2. Enter and press <Return>.
matrix
The command line window opens at the following directory location:
/home/matrix_rec
Use the command line window to enter the gcode commands that are described in the
following section.
(see figure 27, ).
1
VNR 100 • Reference Information
Commands
30