Screen Messages - Panasonic GTWIN Reference Manual

GTWIN Reference Manual

6.2 Screen Messages

In addition to screen data, the GT unit also displays the following messages.
Screen message Description
Data is being transferred from the PC to the GT unit.
Data is being transferred from the GT unit to the PC.
There is no base screen data.
 If necessary, create base screen data and transfer it
to the GT unit.
Screen settings from the PLC, the GT main unit's switch
part or the auto-paging indicate an unregistered screen
number.
 Create and register screen content or specify the
correct screen number.
When bringing up the keyboard screen during data input,
an unregistered keyboard screen number was specified.
 Create and register keyboard screen or specify the
correct keyboard number.
GT configuration data and keyboard screen data exist in
the GT main unit, but there is no base screen data.
 If necessary, create base screen data and transfer it
to the GT unit.
The total capacity of transferred base screen data
exceeds the capacity the GT unit (View menu  Total
Memory Usage).
 When transferring data, select "Transfer Data After
Clear GT Screen".
 Delete part of the base screen data.
6.2 Screen Messages
235