Parts and Their Functions
5.11.3 Replacement Tab for Custom Parts
Activate the "On" option button to enable replacement, i.e. to enable changing the appearance
of the custom part.
Then enter settings to specify when the appearance is changed and which reference device
triggers the change. Remember, "replacement" has nothing to do with the custom part's
operation but only with the appearance of the custom part when the specified reference
device is active!
Here is the drawing dialog (see p. 129) when you have defined the method ON/OFF.
The custom part will assume 1 of 2 appearances.
Here is the drawing dialog (see p. 129) when you have defined the method direct, for
example, with number of replacements = 10. The custom part will assume 1 of 10
appearances based on which reference device is active.
230
GTWIN Reference Manual