Panasonic GTWIN Reference Manual page 37

Introducing GTWIN
Setup 2 parameters
Field
Through Function (if
available)
Setup 2 tab for GT32
Setup 2 parameters
Field
Countdown timer (see p.
37)
SD Memory Card Menu
(if available)
Free Space on the SD
card
Function when writing to
SD Card
36
Description
Specify to which units to send data when received from a higher-order PC or PLC.
Description
Select whether to use the countdown timer or not. There are 16 countdown timers
available (number 0 to F). Only available for the following GT models: GT02, GT02L,
GT03-E, GT05, GT12, GT32, GT32-E.
Select whether to automatically display the SD memory card menu on the GT screen
or not.
Activate to define at how much space to write to the device specified.
 Screen display when writing: when activated, "Saving Logging File" will appear
on the GT screen when data is being written to the SD card.
 Output during write: specify a device that will turn ON during writing.
 Stop Writing Control: the save operation will be aborted if the device specified
turns ON, such as when a power outage signal is detected.
 Output when error occurs: if an error occurs during the save operation, e.g. if the
SD memory card is full, this device turns ON.
GTWIN Reference Manual