Panasonic GTWIN Reference Manual page 217

Parts and Their Functions
Field
Direction
Stop Update
Number of Plots
Pen Move
When the line graph fills the complete display area, the graph is shifted by the amount
specified in "Number of Scrolls". For example, with the following settings the line graph would
be displayed as shown below.
Number of Scrolls
Direction
Number of Plots
Sheet Move
The number of lines specified are drawn continuously in the direction specified. This function
can be compared to a printer using continuous paper - the print head always stays in the
same position while the paper moves forward. For example, with the following settings the line
graph would be displayed as shown below.
Direction
Number of Plots
216
Description
Sheet Move. The number of lines specified are drawn continuously in the direction
specified.
Number of Scrolls. Specify how far to scroll ahead when the display area is full (see
figure below).
Specify which direction to draw the line graph.
By default, line graph data is sampled continuously. You can set a PLC register to stop
updating the line graph by selecting "On".
In sampling mode, a "plot" occurs for each sampling interval. For example, if the
"Number of Plots" = 20, an address is sampled 20 times, scrolling across the screen in
20 steps before disappearing off the edge.
1
Right
5
Left
5
GTWIN Reference Manual